Avoid moisture problems, mold or condensation with proper technical planning of your enclosures
At the time of installing aluminum enclosures in Sabadell, Many people pay their attention to design, Aesthetics or even the thermal efficiency of glass. Nevertheless, There are two essential technical aspects that can make a big difference in the comfort and durability of closed space: drainage and ventilation.
The lack of a good water evacuation system and a controlled ventilation can cause mild discomfort such as the formation of vaho in the crystals, even more serious problems such as leaks, persistent condensation or even deterioration of interior materials due to moisture accumulation. In this article, We address in detail what you should take into account about drainage and ventilation in aluminum enclosures.
Why is drainage in enclosures important?
The enclosures, Being exposed abroad, They receive direct rainwater, air humidity or even internal condensation. If this moisture is not properly evacuated, accumulates in the lower profiles, generating leaks inland or weakening the sealed over time.
Los aluminum enclosures Well designed they incorporate integrated drainage channels in their profiles. These channels drive water to outer holes or evacuation systems connected with downspouts. The key is that this drain is effective even during heavy rains and that does not easily obstruct with dust, leaves or waste.
Common drainage systems in enclosures:
-Hidden internal channels: Integrated in the enclosure profiles.
-Taloneras or Pabeaguas: facilitate water outlet and protect the encounter with the ground.
-Microdesagües in sliding guides: important for sliding or folding doors.
In poor planned facilities, Many times the angle of inclination of the lower frame is not considered, which prevents water from flowing naturally to the outlet points. This omission is frequent in non -professional works, something that can be avoided by hiring specialists in aluminum enclosures in Sabadell.
Ventilation: Key to avoid condensation
One of the biggest enemies of comfort in a closed space is condensation. This occurs when air vapor in the air comes into contact with a colder surface (Generally glass or metal), transforming into liquid water.
In aluminum enclosures poorly ventilated, Wet inner air stagnates, favoring the appearance of drops in crystals, frames or even contiguous walls. In the long term, This accumulated moisture can encourage mold proliferation, damage furniture and reduce the thermal efficiency of space.
How is it solved?
Through a controlled ventilation that allows to renew the inner air, eliminating excess moisture and balancing temperatures.
There are several technical solutions, depending on the type of enclosure:
-Passive ventilation grilles: They allow air entry and output without electrical mechanisms.
-Forced ventilation: by extractors or fans with timer or moisture sensors.
-Profiles with microventilation: Some aluminum profiles allow a minimum opening to renew the air without compromising safety or thermal insulation.
In homes near the coast or areas with high environmental humidity, as can happen in many areas close to aluminum enclosures in Sabadell, This type of ventilation is especially relevant to avoid structural problems over time.
Common mistakes you should avoid
-
Think that total sealing is ideal: A totally hermetic enclosure without air renewal can generate a microclimate moisture.
-
Do not contemplate ventilation grilles: For aesthetics or ignorance, Many projects omit these small elements that are fundamental.
-
Install enclosures without earrings: If there is no adequate angle at the base of the enclosure, Water is not evacuated correctly.
-
Do not perform the drainage system: Even the most modern systems require review to avoid obstructions.
Avoiding these errors not only guarantees a healthier and more durable environment, but also prolongs the useful life of materials, reduces repair costs and improves the energy efficiency of space.
The importance of a professional installation
Having qualified installers not only guarantees the correct placement of the enclosure, but also the design of a solution adapted to the local climate, the orientation of space and existing materials.
A company with experience in aluminum enclosures in Sabadell You will know how to adapt both the drainage system and the ventilation to the particularities of the project: type of space use (laundry, dispatch, salón), location (penthouse, patio, terrace), and other factors such as acoustic insulation or solar control.
Maintenance and review: The key to lasting performance
Although the aluminum enclosures They are known for their durability, The efficacy of drainage and ventilation also depends on regular maintenance.
It is recommended:
-Check and clean the drainage channels At least twice a year.
-Verify the state of sealing tires, especially if they have been exposed to intense solar radiation.
-Check the presence of condensation in cold or humid days and adjust the ventilation system if necessary.
These small preventive actions help aluminum enclosures remain as a long -term profitable investment.
Although many times they go unnoticed, Drainage and ventilation are essential components in any external enclosure system. Without them, Space loses comfort, efficiency and durability.
If you are considering install aluminum enclosures in Sabadell, Be sure to work with professionals who contemplate from the design to the execution all the technical details necessary for a successful installation. Remember that a beautiful but badly ventilated or without adequate drainage can be transformed into a constant source of problems. With adequate planning, It will be the opposite: A comfortable space, functional and durable the 365 days of the year.
